R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.4.3 Obtaining a Hard Copy of screen data
2-140
2.4.3
Obtaining a Hard Copy of screen data
You can make printouts from the screen data using the parallel interface (compliant with Centronix).
The printers compatible with the analyzer use ESC/P, ESC/P Raster or HP PCL as the control codes (some
of these printers may present functional restrictions).
ESC/P: Epson Standard Cord for Printer
ESC/P Raster: Epson Standard Cord for Printer Raster mode
HP PCL: Hewlett Packard Printer Command Language
Recommended printers are listed in Table 2-5.
Table 2-5 Recommended Printers
NOTE:
Only ESC/P Raster and HP PCL are available for color printing.
*1 indicates that ESC/P Raster is used for color printing.
*2 indicates that HP PCL is used for color printing.
Connecting the printer
CAUTION:
Be sure to turn the power off on the analyzer before connecting a
printer.
1.
Connect the printer to the PRINTER connector on the rear panel using the IBM-
PC compatible cable provided.
Setting up output destination
2.
Press CONFIG, Copy Config and Copy Device.
The Copy Device dialog box used to select the screen data destination is dis-
played.
3.
Select Printer.
The Copy Device dialog box is closed.
The Copy Config menu is displayed.
Manufacturer
Model
Epson
PM-900C
*1
, PM-880C
*1
, PM-800C
*1
, PM-770C
*1
, PM-750C
*1
,
PM-2000C, EM-900C
*1
, MJ-930C, MJ-830J, MJ-700V2C
Hewlett Packard
DeskJet 880C
*2
, DeskJet 694C
*2
, DeskJet 505J, LaserJet 5L
Canon
BJ-M70, BJC-430J, BJC-420J, BJC-410J, BJC-600J, BJC-50V
