R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.4.1 Saving/Recalling Measurement Conditions
2-133
Deleting the file list
1.
Perss SHIFT, RCL(SAVE) and List Reg/File.
The file list is deleted.
(2)
Protecting Data
To prevent someone from accidentally deleting or overwriting data, you can use the file protection
feature.
Selecting the device
1.
Press SHIFT and RCL(SAVE).
The Save menu and the file list are displayed.
2.
Press Device RAM/FD(FD).
The FD is selected.
NOTE:
When the analyzer is equipped with a floppy disk drive, Device RAM/FD is
displayed; when the analyzer is equipped with a memory card, Device RAM/
A/B is displayed.
Selecting the file
3.
Press Save File.
The Save File (used to save data to file) is displayed.
4.
Select the file from the file list using the data knob.
Protecting the file
5.
Press Write Protect.
The selected file display changes from RW (read or write) to RO (read only), indi-
cating that data protection has been enabled.
Figure 2-148 File Protection Enabled
