R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
6.2 R3267 Specifications
6-13
(7)
General Specifications
External gate input
Connector:
Impedance:
Stops sweeping:
Allowed to sweep:
BNC female, rear panel
10 k
Ω
(nominal), DC coupled
While a TTL output is at LOW level.
While a TTL output is at HIGH level.
Trigger output
Connector:
Amplitude:
BNC female, rear panel
TTL level
I/O interface
GPIB:
RS232:
Printer:
Extended I/O port:
FDD:
IEEE-488 bus connector, rear panel
D-SUB 9pins, rear panel
D-SUB 25pins, rear panel
D-SUB 25pins, rear panel
3.5 inch floppy disk drive
Direct print:
Output with ESC/P, PCL, ESC/P raster commands
Characteristics
Specification
Temperature
Operating environment range
Storage environment range
Relative humidity
0
°
C to +50
°
C
-20
°
C to +60
°
C
85% or less (Without condensation)
AC input power source
Automatic switching to 100 VAC or 220 VAC
For 100 VAC:
100 to 120 VAC, 50 or 60 Hz
For 220 VAC:
220 to 240 VAC, 50 or 60 Hz
Power consumption
300 VA or below
Mass
18 kg or less (not including options, accessories, etc.)
Dimensions
Approximately 178(H)
×
355(W)
×
423.5(D)mm
(rear feet and connectors are not included in above dimensions)
Characteristics
Specification
