R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.4.3 Obtaining a Hard Copy of screen data
2-141
Setting up control codes and printer mode.
4.
Press Printer.
The Printer dialog box is displayed (See Figure 2-155).
Figure 2-155 Printer dialog box
5.
Select Copy Mode and set this function to Gray.
The output mode is set.
6.
Select Printer Command and set this function to HP PCL.
The type of printer is set.
NOTE:
"Printer Command" is set according to the printer used.
7.
Select Menu Print and turn this function ON.
The print menu is displayed.
8.
Press RETURN.
The Printer dialog box is closed.
Printing
9.
Display the screen you wish to print and press COPY.
The screen data is sent to the printer. The time required for the data to print
depends on the mode and printer used.
NOTE:
1.
When you wish to cancel a printout after pressing COPY, press SHIFT and COPY
(Cancel).
2.
When Paper Feed is set to OFF and you print continuously, some printers may
print one screen on two separate sheets of paper. If this happens, remove the
papers from the printer using Paper Feed.
