R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.4.1 Saving/Recalling Measurement Conditions
2-131
Figure 2-145 Selecting Destination Device
Setting the data to be saved
The data format and data for each item are selected when saving data.
3.
Press Save File and Save Item Setup.
The Save Item Setup dialog box is displayed.
Figure 2-146 Save Item Setup dialog box
4.
Select Data Format and set this function to BINARY.
The format that saves data is set.
5.
Select Setup and turn this function ON.
The function that saves measurement conditions is set.
6.
Select Trace and set this function to A/B.
The function that stores data for both traces A and B is set.
