R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
A.2 Error Message
A-8
610
File already exists.
611
File not found.
612
Invalid disk format (Type 1)
The data saved in the floppy or memory
card is corrupt.
Format the floppy disk or memory card.
613
Write-protected file.
This file cannot be deleted because it is a
read-only file.
614
Disk is full.
615
Write-protected file.
This file is a read-only type.
616
Read-only media.
This media is a read-only type.
Slide the write-protect switch to the write
position.
618
Invalid boot sector signature.
The boot signature cannot be recognized.
The data saved in the floppy or memory
card is corrupt.
Format the floppy or memory card.
619
CRC error.
CRC error occurred. Try one more time. If
the problem continues, format the media.
621
Invalid Frequency-Correction data.
Contact a service engineer.
625
Device name too long.
The device name is too long.
Specify it properly.
626
Extension too long.
The file extension is too long.
A maximum of 3 characters is allowed.
627
Filename too long.
The file name is too long.
A maximum of 8 characters is allowed.
628
Pathname too long.
The pass name is too long.
Specify it properly.
631
I/O error.
An access error to the floppy disk or mem-
ory card occurred.
Try it again. If the problem continues, for-
mat the media.
633
Invalid disk format (Type 2)
The disk geometry is invalid.
Format the floppy disk or memory card.
634
Selected file or register is empty.
There is no data in the file or register.
Specify the saved data.
800
The last process is in progress.
The spectrum analyzer is busy taking mea-
surements repeatedly.
This process continues until the measure-
ments are complete the number of times
specified.
Code
Error message
Remarks
