R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
3.4.3 Factory Defaults
3-86
3.4.3
Factory Defaults
The table below lists the factory defaults (for both analyzer parameters and individual settings).
Table 3-3 Factory Defaults
3.4.4
Defaults Configuration Values
These are the default settings used when the Defaults Config soft key is pressed.
Table 3-4 Default Settings (1 of 3)
Parameter
R3267
R3273
R3264
Center frequency
4 GHz
13.25 GHz
1.75 GHz
Frequency span
8 GHz
26.5 GHz
3.5 GHz
Reference level
0 dBm
0 dBm
0 dBm
Sweep time
AUTO 120 ms
AUTO 400 ms
AUTO 60 ms
Resolution bandwidth (RBW)
AUTO 3 MHz
AUTO 3 MHz
AUTO 3 MHz
Video bandwidth (VBW)
AUTO 3 MHz
AUTO 3 MHz
AUTO 3 MHz
Input attenuator
AUTO 10 dB
AUTO 10 dB
AUTO 10 dB
Trigger mode
FREE RUN
FREE RUN
FREE RUN
Trace mode
A: WRITE B: BLANK A: WRITE B: BLANK A: WRITE B: BLANK
Vertical gradation
10 dB/div
10 dB/div
10 dB/div
Panel
Menu/Dialog box
Default
A
Trace Detector
DET Select
AUTO
Normalize A
OFF
Artifical Analog
OFF
Art Analog
Trc Disp
CONT
XY Cursor
OFF
Delta Y Disp Mode
CURS
ATT
ATT
AUTO
Min ATT
ON
B
Trace Detector
DET Select
AUTO
Normalize B
OFF
CONFIG
Trace Point
1001
Display
ON
COUPLE
RBW
AUTO
VBW
AUTO
Sweep Time
AUTO
RBW:Span
OFF
VBW:RBW
OFF
PLL Band Width
AUTO
