R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.2.12 Measuring Dual Parameters
2-54
5.
Press SHIFT and CONFIG(PRESET).
This sets the analyzer to its presets values.
Setting the measurement conditions
This changes the analyzer settings so that the input signal is displayed more clearly.
6.
Press WINDOW and Zoom.
The Zoom menu is displayed and the screen display is changed to Separate screen
mode.
Figure 2-64 Displaying in Separate Screen Mode
Setting for the upper screen
7.
Press FREQ, 1, 0, 0 and MHz.
A center frequency of 100 MHz is set for the upper screen.
8.
Press SPAN, 1, 0 and MHz.
A frequency span of 10 MHz is set for the upper screen.
Trace 1 is displayed on the upper screen.
