R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.4.6 Setting the Screen Label
2-148
6.
Press the numeric key 1. Check to see if numeric character 1 has been entered
after the characters ADVANTEST (the final display is ADVANTEST1). Only
numeric characters can be entered directly from the numeric keys.
7.
Press Hz(ENTR).
This closes the Label Entry dialog box, and the characters you entered are dis-
played in the upper left-hand corner of the screen.
Figure 2-161 Displaying the Screen Label
CAUTION:
1.
The dialog box will close, cancelling the data you entered when you press any keys
other than numeric keys, the -(BS) key and Hz key.
2.
A new label is always overwrites the old one. As a result, the old alphanumeric
character(s) will be left undeleted if the number of characters of the new label is
less than that of the old label.
When you wish to delete the entire old label, press the Label Delete key first to
delete it, press the Label Edit key and then enter the new label.
Deleting a label previously set
8.
Press FORMAT, Label and Label Delete.
A previously set label is deleted from the screen.
