R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.1.1 Front Panel
2-8
2.1.1.9 REMOTE Section
Figure 2-10 REMOTE Section
1.
LCL key
Turns off the GPIB remote control mode (this applies only
when the REMOTE lamp is lit).
2.
REMOTE lamp
Lit when in the remote state.
3.
CONFIG key
Sets interface operation conditions, etc.
PRESET key (SHIFT, CONFIG) Resets all analyzer settings to the factory defaults, or to the
user-defined presets.
4.
SHIFT key
SHIFT is used to select the secondary functions that are labeled
in blue above the panel keys.
5.
SHIFT lamp
The LED is lit when the shift key has been pressed.
1
2
4
5
3
