ADVANTEST R3267 series, Operation Manual

Page: 308 / 398

R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
5.2.9 GPIB Command Codes
5-23
Table 5-1 A Key/B Key (Trace A/Trace B) (3 of 3)
Table 5-2 ATT Key (Attenuator)
Function Listener Code
Talker Request
Panel
Key
Remarks
Code Output Format
Artificial Analog Artificial Analog ON ANLG ON ANLG? 0: OFF A
OFF ANLG OFF 1: ON A
Display Mode PAUSE ANLGDSP PAUS ANLGDSP? 0: PAUSE A
CONT ANLGDSP CONT 1: CONT A
Sampling Times ANLGTM * ANLGTM? Integer (2 to 32) A
Y display mode Available only when
the XY cursor is set
to on.
Cursor ANLGDLT CUSR ANLGDLT? 0: Cursor A
Data ANLGDLT DATA 1: Data
XY Cursor XY Cursor ON XYCSR ON XYCSR? 0: OFF A&B
OFF XYCSR OFF 1: ON A&B
X Cursor Position CSRX * CSRX? Frequency/hour A&B
Y Cursor Position CSRY * CSRY? Level A&B
Reading of
∆
X value ––– CSRDX? Frequency/Time A Available only when
the XY cursor is set
to on.
Reading of
∆
Y value ––– CSRDY? Level
Set Anchor SETANC ––– ––– A&B
Remove Anchor RLSANC ––– ––– A&B
Trace Data Output from A memory ASCII ––– TAA? 5 bytes + Delimiter For 1 point
BINARY ––– TBA? 2 bytes
×
1001 points
(or 501 points)
EOI signal
Output from B memory ASCII ––– TAB? 5 bytes + Delimiter For 1 point
BINARY ––– TBB? 2 bytes
×
1001 points
(or 501 points)
EOI signal
Input from A memory ASCII TAA ––– ––– For 1 point
BINARY TBA ––– ––– EOI signal
Input from B memory ASCII TAB ––– ––– For 1 point
BINARY TBB ––– ––– EOI signal
Function Listener Code
Talker Request
Panel Key Remarks
Code Output Format
Attenuator ATT AT * AT? Level ATT
ATT AUTO AA AA? 0: MNL ATT
1: AUTO
Min.ATT ATMIN * ATMIN? Level ATT
Min.ATT ON ATMIN ON[*] ATMINON? 0: OFF ATT
OFF ATMIN OFF 1: ON ATT