background image

THANK YOU

 

We appreciate the trust and confidence you have placed in Husky through the purchase of this level. We strive to 

continually create quality products designed to enhance your home. Visit us online to see our full line of products 

available for your home improvement needs. Thank you for choosing Husky!

Troubleshooting

Problem

Solution

The display does not light 

when the On/Off button is 

pushed.

…

…

Open the battery compartment, and check to ensure that batteries are 
inserted correctly.

…

…

Check the battery capacity. Replace the batteries if necessary.

…

…

The LCD display is damaged. Contact our service department for 
professional help.

The laser line is weak.

…

…

Check the battery capacity. Replace the batteries if necessary.

…

…

The surrounding light is too bright.

The laser line is not projecting.

…

…

Ensure that the batteries are inserted correctly.

…

…

Check the battery capacity. Replace the batteries if necessary.

…

…

The laser pulling head is not pulled to the correct position.

…

…

The laser diode is damaged. Contact our service department for 
professional help. DO NOT attempt to repair it yourself. Serious radiation 
exposure injury could result.

Warranty

If, within one year from date of purchase, this HUSKY® product fails due to a defect in materials or workmanship, 

please call the HUSKY® Service Center at 1-888-HD-HUSKY. Please keep a copy of the original Home Depot receipt 

for all warranty claims. This warranty excludes incidental/consequential damages and failures due to misuse, abuse, 

or normal wear and tear. This warranty gives you specific rights, and you may also have other rights, which vary from 

state to state. Please visit the store or call 1-888-HD-HUSKY for details.
This warranty is in lieu of all other warranties expressed or implied.

Questions, problems, missing parts? Before returning to the store,  

call Husky Customer Service 

8 a.m.-7 p.m., EST, Monday-Friday, , 9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

USE AND CARE GUIDE

24 IN. DIGITAL LEVEL WITH LASER

Questions, problems, missing parts?  
Before returning to the store, call  
Husky Customer Service 
8 a.m. - 7 p.m., EST, Monday-Friday 
9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Item #935 263

Safety Information

PLEASE READ AND SAVE THESE INSTRUCTIONS

CAUTION:

 Read, understand, and follow all safety 

rules and instructions before using this tool. These 
safety instructions should be followed at all times. 

Failing to follow these safety instructions could result 
in injury to yourself or others. Also, failing to read and 
follow these instructions may cause damage to your 
equipment.

IMPORTANT LASER PRECAUTIONS

WARNING:

 Be sure to read and understand all 

instructions in this manual before using this product. 
Failing to follow all instructions may result in hazardous 
radiation exposure.

CAUTION:

 DO NOT attempt to modify the 

performance of the laser device in any way. This may 

result in dangerous exposure to laser radiation.

CAUTION:

 The use of optical instruments with this 

product will increase eye hazard.

IMPORTANT:

 The following labels are on your 

tool. They indicate where the laser light is emitted by 

the level. ALWAYS BE AWARE of the location of laser 

aperture when using the laser level. ALWAYS MAKE 
SURE that any bystanders in the vicinity are made aware 

of the dangers of looking directly into the laser.

CAUTION

935 263

MADE IN CHINA

SERIAL NO.

LASER RADIATION– 

DO NOT STARE INTO BEAM

Maximum output 

power < 1mw, 

650nm, class II laser product

Complies with 21 CFR parts 

1040.10 and 1040.11

3V    2X1.5V AAA 

AVOID EXPOSURE – 

LASER RADIATION IS EMITTED 

FROM THIS APERTURE

WARNING:

 LASER LIGHT. LASER RADIATION. Avoid 

Direct Eye Exposure. DO NOT stare into the beam.

WARNING:

 DO NOT remove or deface any product 

labels. Removing product labels increases the risk of 
exposure to laser radiation.

WARNING:

 Use of controls or adjustments or 

performance of procedures other than those specified 
herein may result in hazardous radiation exposure.

WARNING:

 DO NOT stare directly at the laser beam 

or project the laser beam directly into the eyes of 
others. Serious eye injury could result.

WARNING:

 DO NOT place the laser level in a position 

that may cause anyone to stare into the laser beam 
intentionally or unintentionally. Serious eye injury 
could result.

WARNING:

 DO NOT set up the laser level at eye level 

or operate the level near a refl ective surface – the 

laser beam could be projected into your eyes or into the 
eyes of others.

WARNING:

 DO NOT attempt to view the laser beam 

through optical tools such as telescopes or transits. 

Serious eye injury could result.

WARNING:

 DO NOT operate the laser level around 

children or allow children to operate the tool. Serious 

eye injury could result.

WARNING:

 ALWAYS turn the laser “OFF” when not 

in use. Leaving the tool “ON” will increase the risk of 
someone inadvertently staring into the laser beam.

WARNING:

 DO NOT operate the tool in combustible 

areas such as in the presence of fl ammable liquids, 

gases, or dust.

WARNING:

 DO NOT use this laser level for any 

purpose other than those outlined in this manual. This 

could result in serious injury.

WARNING:

 DO NOT leave the laser level “ON” and 

unattended.

Pre-Operation

TECHNICAL SPECIFICATIONS

Power Supply

2 “AAA” 1.5-Volt Batteries (not included)

Measuring Range

0-360°

Optimum Operating Temperature

32° F to 104° F (0° C to 40° C)

Accuracy of Vials

±0.029° (level or plumb) - See Figure 1

Accuracy of Digital Display

±0.1° (level or plumb), ±0.2° (all angles)

Laser Diode Type

Red Laser Diode 650 mm

Laser Class Output

Class II Maximum Power < 1 mW

Accuracy of Laser Line

±1/2 in. @ 12 ft.

Estimated Battery Life for Laser

25 hours with alkaline batteries

DIGITAL LEVEL FEATURES

This digital level is a manual-leveling tool that can be used inside and outside for horizontal (level), vertical (plumb), 

and square alignment projects. It comes fully assembled. Please read and understand all instructions in this instruction 

manual before using the product. Figure 2 and the list that follows describe the features of this level.

1

4 7

5

6

8

10

8

9

2

3

11

14

14

12

13

13

Figure 2

13

1.  On/Off

 – Press this button to turn the level on. Turn the level off by pressing and holding the button for about two 

seconds. The level will automatically shut off if left idle for fi ve minutes.

2.  Reset

 – Absolute/Relative Angle Conversion button.

3.  Beeper Button   

- To activate and deactivate the beeper. The beeper will sound at level, 45°, plumb, and the 

last saved angle in the memory.

4.  Memory Button

 – Saves the angle displayed on the screen. Nine consecutive records can be kept in memory. 

Press the button again to return to the measurement mode.

5.  ° %/In/Ft Button 

– Press to change the display units from degrees (°), to pitch (in/ft), to slope (%). Pitch readings 

are in 1/8 in./ft increments. Plus and minus signs indicate that the pitch is slightly more (+) or slightly less (-) 

than the pitch shown on the display.

Pre-Operation (continued)

6.  MR Button 

– Displays the records in the memory. The records are recalled from the latest to the earliest.

7.  LCD Display

 – Once you turn on the tool, the first display is the temperature (in Fahrenheit). After about two 

seconds, it will automatically display the absolute angle in degrees.

8.  Encased Vertical Vial and Horizontal Vial
9.  Laser Pulling Head 

– The laser is emitted from the aperture at the end of the laser pulling head. Always avoid 

exposure to laser radiation when using the digital level laser.

10.  Hanging Hole 

– Hang the tool here for storage purposes.

11.  Battery Compartment

 – Holds two AAA batteries.

12.  Working Base 

– For accurate measurement, always protect the base from damage or distortion.

13.  Magnets 

– Three magnets for securing the level to steel surfaces.

14.  Rubber Grip

SCREEN ICONS

 

Up/Down Indicator

 – Zero Line (0°) always indicates the level position.  

The bias and the right arrow indicate up or down, away from the level (0°).

 

Battery Capacity Icon

 – Indicates the power remaining in the batteries. Replace 

batteries if the black power bar has disappeared.

 

Beeper Icon

 – When the beeper function is active, this icon will appear on the screen.

M1 (M1...M9)

Memory Icon

 – Indicates the order of the angle being saved in the memory.

Operation

CHANGING THE DISPLAY UNITS

1.  Press the 

° %/In/Ft

 button to convert the measurement units 

between degrees (°), pitch (in/ft), and slope (%). Figure 3 shows 

an example of the LCD display showing a degree measurement.

Figure 3

Operation

2.  Press the 

° %/In/Ft

 button to shift to in./Ft unit. Figures 4 and 5 

show the pitch H=67/8 inch (H=L*tan 

α

, L=1feet, 

α

 = 30.0°).

Figure 4

Figure 5

 H = L * tan

α

α

L

H

3.  Press the 

° %/In/Ft

 button again to get the slope of the surface 

H=57.7cm (H=L*tan 

α

, L=100 cm, 

α

=30.0°), as shown in Figures 

6 and 7.

Figure 6

Figure 7

 H = L * tan

α

α

L

H

If the angle is greater than 45° but less than 90°, the slope of the 

surface is H=L / tan 

α

 (see Figure 8).

Figure 8

(45˚ < 

α 

< 90˚)

α

 H = L * tan

α

L

H

RELATIVE ANGLE MEASUREMENT

1.  Lay the digital level on the surface.
2.  Turn on the level. The LCD screen indicates the absolute angle between true level and the surface.
3.  Push the Reset button to enter the relative angle measurement mode. The display reads 0.0°, while its top left corner 

shows the zero line. Move it to another working surface, and the relative angle between the two working surfaces will 

be displayed.

4.  To change the display units for the measured angle, see Changing Display Units in the Operation section.
5.  To return to absolute angle measurement, turn off the level and power it on again.

ABSOLUTE ANGLE MEASUREMENT

1.  Lay the digital level on a surface, ensuring the base sits flat against the surface. The level has three magnets in the 

bottom to secure it to steel surfaces. If necessary, you can turn the digital level upside down during measuring. The 

display will continue to read normally.

2.  When you turn the level on, the display figure indicates the absolute angle between true level and the surface. By 

observing the vials, you can judge whether the surface is horizontal or vertical.

3.  While the angle changes, the bias on the display shows the tilt trend of the tool while the right arrow points upward or 

downward.

4.  To activate the beeper, push the 

 button. The beeper will sound at level, 45°, plumb, and the last saved angle. To 

deactivate, push it again.

5.  Press the 

Memory

 button to save the measured angle in the memory. This level can remember the last nine groups of 

data measured (from 

M1

 to 

M9

, in turn).

6.  Press the 

MR

 button to recall these angles. The records will be read out from the latest to the earliest (

M9

 to 

M1

) in turn.

7.  To change display units used for the measured angle, see the Changing Display Units section of the Operation section.
8.  To make a new measurement, press the 

Memory

 button to return to measurement mode.

Operation (continued)

LASER ALIGNMENT

This digital level features a laser diode located in the laser pulling head 

(3) at the right of the level. It can project a reference laser line along the 

wall. The laser line is aligned with the horizontal vial and the working 

base.

To turn the laser on see Figure 9 and 10.

1.  Push the lock button (1) with your thumb.
2.  At the same time, pull the panel (2) with your forefinger to lead the 

laser head to the lowest place (as shown in Figures 9 and 10). The 

second image shows the laser head (3) in the open position.

3

3

1

2

Figure 9

Figure 10

PROJECTING A LASER ON THE WALL

1.  Put the digital level on the wall.
2.  Align the laser to the desired position, and move one side of the 

level up or down until the bubble in the horizontal vial is centered. 

You can make some alignments with the laser.

Figure 11

Maintenance

This digital level has been designed to be a low maintenance tool. However, in order to maintain its performance, you 

must always follow these simple directions. Careful use and maintenance will extend the digital level’s useful life and 

prolong its accuracy.

 

ALWAYS handle the tool with care. Treat it as an optical device, such as a camera or binoculars.

 

AVOID exposing the tool to shock, continuous vibration, or extreme hot or cold temperatures.

 

ALWAYS store the tool indoors. 

 

The level is weather- and water-resistant. If the level is splashed with mortar or other construction-site residue, 
simply wipe it clean with a damp cloth. DO NOT immerse the level in water.

 

Aluminum surfaces can be cleaned with a non-abrasive cleaning powder.

 

Check the batteries regularly to avoid deterioration. ALWAYS remove the batteries from the tool if it is not going 
to be used for an extended period of time.

 

Store the level away from extreme temperatures below 20°F (-6°C) or higher than 140°F (60°C).

 

DO NOT disassemble the digital level.

Safety Information (continued)

WARNING:

 DO NOT attempt to repair or disassemble 

the laser level. If unqualifi ed persons attempt to repair 
this level, serious injury could result.

IMPORTANT BATTERY PRECAUTIONS

WARNING:

 BE SURE TO read and understand all 

instructions. Failing to follow all instructions listed 
below may result in electric shock, fire, and/or serious 
personal injury.

WARNING:

 his battery-operated tool uses only 

“AAA” batteries. Using any other batteries may create 
a risk of fire.

WARNING:

 Carefully follow all instructions and 

warnings on the battery label and package.

WARNING:

 Remove dead batteries immediately and 

dispose of them according to your local ordinance.

WARNING:

 Always insert the batteries correctly. The 

polarity (+ and -) is marked on the batteries and on the 
tool. DO NOT:

…

…

Short the battery terminals.

…

…

Charge the batteries.

…

…

Mix old and new batteries. If either or both of 
the batteries are weak, replace both of them 
with two new batteries. These new batteries 
should match each other in brand and type.

…

…

Dispose of batteries in a fire.

WARNING:

 Keep batteries out of the reach of children.

WARNING:

 Remove batteries if the device will not be 

used for several days.

WARNING:

 Use only accessories that are 

recommended by the manufacturer for your model. 
Accessories that may be suitable for one tool may 

become hazardous when used on another tool.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions:
1.  This device may not cause harmful interference.
2.  This device must accept any interference received, 

including interference that may cause undesired 

operation.

Changes or modifications not expressly approved by the 

party responsible for compliance could void the user’s 

authority to operate the equipment.

NOTICE:

 This equipment has been tested and found to 

comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following 
measures: Reorient or relocate the receiving antenna. Increase 
the separation between the equipment and receiver. Connect 
the equipment into an outlet on a circuit different from that 
to which the receiver is connected. Consult the dealer or an 
experienced radio/TV technician for help.

1

0.029˚ = 0.5mm/m

Figure 1

Summary of Contents for 935 263

















Reviews: