3Com VCX V7000, Maintenance Manual

Page: 280 / 344

280 A
PPENDIX
C: U
PGRADING
VCX S
ERVER
S
OFTWARE
F
ROM
V6.0
TO
V7.0
Manually Configuring Replication for an IP Telephony Server or IP
Telephony and Messaging Server
for more information.
c The
Enter the MASTER DEFINITION SITE IP Address [ IP
address ]
prompt appears.
Enter the IP address of the Master Definition site.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
prompt
appears.
Enter the IP address of the Master Site. If there are more than one
Master Sites, this question repeats until the number of master sites
specified in step
b is reached.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter
y
to continue. The script executes.
When the replication is complete, Multi-Master Replication Status is
reported as NORMAL . Do not continue to the next step on this server
until the replication is complete. Note that replication can take
approximately 20 minutes to complete.
f You can check the replication by entering the following command:
./checkReplication
6 Set up database replication on Region 2 by entering the following
commands (you should still be logged in to the Authentication and
Directory server as
cworks ):
cd /opt/3com/VCX/vcxdata/bin
./setupReplication
The replication setup script starts. Follow the procedure described in
step 5.
7 Once replication is complete and status is NORMAL on Region 1 and
Region 2, start the Authentication and Directory servers in each region by
entering the following commands while logged in as
root :
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
8 Start the Tomcat process on the primary Call server and the secondary
Call server in each region by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start