3Com VCX V7000 Page 307 Maintenance Manual Download

Page: 307 / 344

Downgrading from 7.1.y to 7.1.x

307

On the Master Definition Site (the primary server), log in as

root

and enter

these commands:

cd /opt/3com/VCX/scripts/rc3.d

./S70tomcat stop

On the Master Site (the secondary server) log in as

root

and enter these

commands:

cd /opt/3com/VCX/scripts/rc3.d

./S70tomcat stop

On the Master Definition Site (the primary server), log in as

cworks

and

enter these commands:

cd /opt/3com/VCX/vcxdata/bin

./dropReplication

When the script prompts you, enter the site ID of the Master Site.

Restore VCX Databases

Before upgrading from version 7.1.

to 7.1.

, you must have backed up

the system databases.

To restore the database on each server that is running the IP Telephony
and Messaging or IP Telephony software configuration, see

Restoring the

VCX Authentication and Directory Server Database

VCX systems require database replication between these servers. You
must restore the database on both servers.

Restore IP Messaging Databases

Before upgrading from version 7.1.

to 7.1.

, you must have backed up

the IP Messaging databases

To restore the database on each server that is running IP Messaging server
software, see the

IP Messaging Operations and System Administration

Guide.

VCX systems require mirroring between IP Messaging servers. You must
restore the database on both servers.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands