3Com VCX V7000 Maintenance Manual Download

Page: 183 / 344

Upgrading a Single-Site System With Four Servers

183

------------------- Installation Completed Successfully -------------------

------------------- VCX version 7.1.

c is now available -------------------

Switch to the new software version by entering the following command:

vcx-switchversion 7.1.

The system displays several status messages and provides prompts that
allow you enable UPS Monitoring and Global Voicemail Integration.

The UPS Monitoring prompt appears:

An Uninterruptible Power Supply (UPS) can be used with VCX

systems to avoid disruption due to a power outage. VCX

provides a UPS monitoring service which tracks the UPS's

status and performs a safe shutdown when the its battery is

depleted during a long power outage. To use this feature,

you must have a compatible UPS installed and configured in

accordance with the VCX documentation.

Enable UPS monitoring? [N] :

If you do not have a UPS installed and enter

(or press

Enter

); the

remaining UPS configuration prompts are not displayed.

If you do have a UPS installed and enter

and see

Configuring UPS

Monitoring

for information on the subsequent UPS configuration

prompts.

The Global Voicemail Integration prompt appears:

When multiple IP Messaging systems are in use, for example at

a region and one or more branches, the Global Voicemail

capability allows these systems to act as a single unified

voicemail system. Say 'yes' here if this system participates

in Global Voicemail.

Is Global Voicemail enabled? [N] :

If you have installed and configured (through the IP Messaging
administrator configuration interface) a pair of Global Voicemail
Central Servers (GVCS) to enable global voicemail integration, you can
answer

to this prompt and go to step b. If not, enter

and go to

step 5.

The upgrade script asks if this server as a Global Voicemail Central
Server:

In a Global Voicemail system, one site's IPMSG servers are

designated as the Central Servers and coordinate the

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands