3Com VCX V7000 Page 227 Maintenance Manual Download

Page: 227 / 344

Upgrading a Single-Site System With Four Servers

227

Obtain a copy of the

vcx-ipmsg-7.1.

c.tar

software upgrade file and

place it in the

/opt/installtemp

directory on the primary IP Messaging

server and on the secondary IP Messaging server.

Next, execute the following steps in the order listed:

■

Upgrade the primary IP Telephony server. See

Upgrading the Primary IP

Telephony Server

■

Upgrade the primary IP Messaging server. See

Upgrading the Primary

IP Messaging Server

■

Upgrade the secondary IP Telephony server. See

Upgrading the

Secondary IP Telephony Server

■

Upgrade the primary IP Messaging server. See

Upgrading the

Secondary IP Messaging Server

■

Set up database replication on the primary IP Telephony server. See

Set

Up Database Replication

Upgrading the

Primary IP Telephony

Server

Follow the steps in this section to upgrade the primary IP Telephony
server.

To start the upgrade process, enter these commands on the primary IP
Telephony server:

cd /opt/installtemp

tar xvf vcx-softswitch-7.1.

c.tar

cd upgrade-7.1.

./install-upgrade

The system may prompt you to confirm that a new operating system
version will be installed and indicates which disk partition will be used
after the upgrade. If you see such a prompt, answer

The system displays several status messages. The last two messages are:

------------------- Installation Completed Successfully -------------------

------------------- VCX version 7.1.

c is now available -------------------

Switch to the new software version by entering the following command:

vcx-switchversion 7.1.

The system displays several status messages and then reboots. After the
the reboot process has been completed, the system starts VCX 7.1.

Telephony services.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands