manualshive.com logo in svg

3Com VCX V7000, Maintenance Manual

Share
Download
3Com VCX V7000 Maintenance Manual Download Page 245

Upgrading a Multi-Site VCX System with Branch Offices

245

To upgrade the Call servers:

1

Log on, as 

root

, to the primary Call server and the secondary Call server in 

a region.

2

Obtain a copy of the 

vcx-callserver-7.1.

y

c.tar

 software upgrade file 

and place it in the 

/opt/installtemp

 directory on the primary Call server 

and on the secondary Call server. 

3

Upgrade the primary Call server by following these steps:

a

Start the upgrade process by entering the following commands:

cd /opt/installtemp

tar xvf vcx-callserver-7.1.

y

c.tar

cd upgrade-7.1.

y

c 

./install-upgrade

The system may prompt you to confirm that a new operating system 
version will be installed and indicates which disk partition will be used 
after the upgrade. If you see such a prompt, answer 

y.

The system displays several status messages. The last two messages 
are:

------------------- Installation Completed Successfully -------------------

------------------- VCX version 7.1.

y

c is now available -------------------

b

Switch to the new software version by entering the following 
command:

vcx-switchversion 7.1.

y

c 

The system displays several status messages and then reboots. After 
the reboot process has been completed, the system starts VCX 7.1.

y

 

Call server.

c

After the system has completed the restart process, verify that the 
upgrade has occurred by entering this command:

ls -l /opt/3com/VCX

The symbolic link (VCX) should point to the new version of the VCX 
software (7.1.

y

c). If the link does not point to the new version, wait a 

few minutes and reenter the command. This could take several 
minutes and it is important the link pointer is correct before 
proceeding.

Example Output

/opt/3com/VCX -> /opt/3com/VCX.7.1.

y

c 

Summary of Contents for VCX V7000

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands