3Com VCX V7000 Page 276 Maintenance Manual Download

Page: 276 / 344

276

PPENDIX

C: U

PGRADING

VCX S

ERVER

OFTWARE

ROM

V6.0

V7.0

Stop database replication by entering the following commands:

cd /opt/3com/VCX/vcxdata/bin

su cworks

./dropReplication

The drop replication script starts. Follow these steps:

The

Enter the VCX Site Identification i.e. Site Id

prompt

appears.

Enter site ID configured for this system.

The

Enter the Number of MASTER SITEs other than the MASTER

DEFINITION SITE

: prompt appears.

Enter the number of Master sites. To determine the number of Master
Sites associated with this office, use the

listVcxdata

command. See

Manually Configuring Replication for an IP Telephony Server or IP
Telephony and Messaging Server

for more information.

The

Enter the MASTER DEFINITION SITE IP Address [

address

]

prompt appears.

Enter the IP address of the Master Definition site.

The

Enter the MASTER SITE 1 IP Address [0.0.0.0]

prompt

appears.

Enter the IP address of the Master Site. If there are more than one
Master Sites, this question repeats until the number of master sites
specified in step

is reached.

The

Do you want to continue with the above settings? [n/y]:

prompt appears.

Enter

to continue. The script executes.

Enter the following command to exit the

cworks

account and return to

the

root

account:

exit

Obtain a copy of the

vcx-dataserver-7.0.

c.tar

software upgrade file

and place it in the

/opt/installtemp

directory on the Authentication

and Directory server. The variable

indicates the version of VCX software

(for example,

vcx-all-7.0.3c.tar)

that will replace version 6.0. The

letter

is always appended to the version number.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands