3Com VCX V7000 Maintenance Manual Download

Page: 91 / 344

Manually Configuring Replication for an IP Telephony Server or IP Telephony and Messaging Server

Manually
Configuring
Replication for an IP
Telephony Server or
IP Telephony and
Messaging Server

This section provides instructions on how to manually perform database
replication for these two configurations:

■

Regional

IP Telephony Server —

IP Telephony Server

configuration

includes the Accounting Services, the Call Records Services, the Call
Processor, and the Authentication and Directory Services.

In this case there is only one “Region”, the single site. One server is
designated as the Primary, and one is designated the Secondary.

■

Regional

IP Telephony and Messaging Server

— An

IP Telephony and

Messaging Server

configuration includes the Accounting Services, the

Call Records Services, the Call Processor, IP Messaging Services, and
the Authentication and Directory Services.

In this case there is only one “Region”, the single site. One server is
designated as the Primary, and one is designated the Secondary.

For these configurations replication must be started manually with the

setupReplication

script.

Perform the following steps on the primary and secondary servers.

root

Enter the following commands:

modfw -p oracle allow <IP address of eth0 for the other

server>

modfw -p oracle allow <IP address of eth1 for the other

server>

Stop the VCX Authentication and Directory server.

cd /opt/3com/VCX/scripts/rc3.d

./S20vcxdata stop

Stop the Tomcat application.

./S70tomcat stop

Remember to perform these steps on each server (primary and
secondary).

On the primary server log in as

cworks

and enter these commands:

cd /opt/3com/VCX/vcxdata/bin

./setupReplication

The script starts to run.

Enter the requested information.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands