3Com VCX V7000 Maintenance Manual Download

Page: 187 / 344

Upgrading a Single-Site System With Four Servers

187

If you do not have a UPS installed and enter

(or press

Enter

); the

remaining UPS configuration prompts are not displayed.

If you do have a UPS installed and enter

and see

Configuring UPS

Monitoring

for information on the subsequent UPS configuration

prompts.

After completing the UPS Monitoring prompts, the server reboots. When
the reboot process has been completed, the system starts VCX 7.1.

services.

After the system has completed the restart process, verify that the
upgrade has occurred by entering this command:

ls -l /opt/3com/VCX

The symbolic link (VCX) should point to the new version of the VCX
software (7.1.

c). If the link does not point to the new version, wait a few

minutes and reenter the command. This could take several minutes and it
is important the link pointer is correct before proceeding.

Example Output

/opt/3com/VCX -> /opt/3com/VCX.7.1.

Set Up Database

Replication

Follow the steps in this section to set up database replication.

Stop the Tomcat process, first on the primary IP Telephony server and
then on the secondary IP Telephony server by entering these commands
(log in as

root

cd /opt/3com/VCX/scripts/rc3.d

./S70tomcat stop

Set up replication on the primary IP Telephony server by entering these
commands:

cd /opt/3com/VCX/vcxdata/bin

su cworks

./setupReplication

The replication setup script starts. Follow these steps:

The

Enter the VCX Site Identification i.e. Site Id

prompt

appears.

Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary IP Telephony server and the
secondary IP Telephony server.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands