3Com VCX V7000, Maintenance Manual

Page: 338 / 344

338 A
PPENDIX
F: C
ALL
P
ROCESSOR
C
OMMAND
L
INE
I
NTERFACE
C
OMMANDS
show Lists all of the Call Processor tables that are used for configuration.
Use the command with a table name as a parameter to view details
of that table.
config Lists all of the configurable tables. Use the command with a table
name as a parameter to configure that table.
diagnostic Allows a user to make run-time only modifications to log levels.
exec Causes a plugin to execute a plugin specific command. To display
available commands for a plugin, issue the name of one of the
plugins listed from the plugin CLI command along with the execute
command.
statistics Displays various types of counters for a particular plugin. To display
available statistics for a plugin, issue the name of one of the plugins
listed from the plugin CLI command along with the statistics
command.
send Sends a message to a plugin.
dump Configures a plugin to display troubleshooting information.
messageTrace Turns on logging for all DMR messages within the Call Processor.
Note: Massage Tracing should only be used for short time intervals
since it affects the Call Processor’s performance due to unnecessary
overhead.
help Lists all of the possible commands that can be used, which are listed
in this table.
plugins Lists all of the plugin modules installed for the Call Processor.
Table 21 Remote CLI Command Descriptions (continued)
Command Description