3Com VCX V7000 Page 313 Maintenance Manual Download

Page: 313 / 344

Downgrading from 7.1.y to 7.1.x

313

The order of the A and B versions may be reversed depending on the
upgrade history of the system.

When you are downgrading, use the earlier of the two operating
system versions in this command:

vcx-os-switch 4.2.0

To confirm that you have selected the operating system version that
you want, repeat the

vcx-os-query

command. Verify that the word

“selected” appears in the

Status

column for the version that you

want.

Example:

OS Version Partition Label Status

A 4.2.0 /dev/hda2 /A selected

B 4.2.1 /dev/hda3 /B active

Reboot the system using this command:

reboot

When the system reboots, it starts VCX 7.1.

services.

Downgrading a Branch Office Server

If you attempt to upgrade a branch office server but the upgrade is
unsuccessful, you must downgrade and contact 3Com Support for
assistance.

Switch VCX Version

To switch the VCX version:

root

and enter this command:

vcx-switchversion --manual 7.x

Example:

vcx-switchversion --manual 7.1.0c

The

vcx-switchversion

command:

■

Stops VCX services

■

Changes a link to point to the requested VCX version

■

Issues a warning that databases must be restored

CAUTION:

Do not reboot the system or restart VCX services until

databases have been restored. The VCX 7.1.x version has been selected

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands