3Com VCX V7000 Maintenance Manual Download

Page: 115 / 344

Sample VCX Server Reconfiguration

115

Sample VCX Reconfiguration Script (continued)

---------- Configuring additional parameters for UPS Monitoring -----------

An Uninterruptible Power Supply (UPS) can be used with VCX systems to avoid

disruption due to a power outage. VCX provides a UPS monitoring service

which tracks the UPS's status and performs a safe shutdown when the its

battery is depleted during a long power outage. To use this feature, you

must have a compatible UPS installed and configured in accordance with the

VCX documentation.

Enable UPS monitoring? [N] :

If you do not have a UPS installed and enter N (or press Return or Enter),
the remaining UPS configuration prompts are not displayed.

It is possible to use multiple UPS units to power a single server if the

server has redundant power supplies with separate power connections.

Will multiple UPS's power this server? [N] : y

A single UPS can power one or more VCX systems. A UPS 'Master'

communicates directly with a UPS, while a 'Slave' communicates with the

Master to get UPS status. Only one 'Master' system should monitor a given

UPS. If this VCX system is the only one connected to the UPS, say 'Y'

here. Note: a VCX system's UPS Monitoring role is independent of any other

role it may have within a VCX deployment.

Do you want this server to be the master ? [N] :

If you answer N to indicate that this server is a slave (not the master), you
will be prompted to enter the IP address of the master.

UPS Monitoring requires a network-enabled UPS. Enter the IP address

assigned to the UPS's management card or Ethernet interface. Note: The UPS

must already be configured with this address.

UPS IP address :

10.230.67.50

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands