3Com VCX V7000 Page 268 Maintenance Manual Download

Page: 268 / 344

268

PPENDIX

C: U

PGRADING

VCX S

ERVER

OFTWARE

ROM

V6.0

V7.0

IP Messaging can be deployed in a client/server configuration to support
more users and distribute services.

■

If you enter

, this system will be configured as the primary IP

Messaging server and no client configuration prompts will appear.

■

If you enter

, this system will be configured as an IP Messaging

server and you will be asked to identify the IP Messaging clients
associated with this server. The following prompts appear:

A list of each of the IPMSG client systems' IP addresses

and hostnames is required. Enter a blank input to

indicate that all clients have been entered.

IP address of IPMSG client 1

Client IP Address:

Enter the IP address of the first IP Messaging client system.

The following prompts appear:

Hostname of IPMSG client 1

Client Hostname:

Enter the hostname of the first IP Messaging client system.

You can identify 20 IP Messaging client systems. The client
configuration prompts appear until you reach the maximum (20
entries) or until you press

Enter

without entering a IP address.

When you finish identifying IP Messaging client systems, the following
prompt appears:

Do you wish to change any of the IP Messaging

Service parameters? [N]:

Press

Enter

to accept the default answer (

). If you enter

, the script

presents each of the items that you entered and allows you to accept
the value or change it.

The system reboots. After the reboot process has been completed, the
system starts VCX 7.0.

IP Messaging services.

After the system has completed the restart process, verify that the
upgrade has occurred by entering this command:

ls -l /opt/3com/VCX

The symbolic link (VCX) should point to the new version of the VCX
software (7.0.

c).

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands