3Com VCX V7000 Maintenance Manual Download

Page: 297 / 344

Downgrading from 7.1 to 7.0

297

installed and if so, how to revert to the previous version. This operation
must be performed on all VCX servers.

The examples in this procedure use the assumption that upgrading from
version 7.0 to 7.1 changed the operating system version from 4.2.1 to
5.1.3.

root

To determine which operating system versions are available, enter this
command:

vcx-os-query

The output from this command appears:

OS Version Partition Label Status

A 4.2.1 /dev/hda2 /A

B 5.1.3 /dev/hda3 /B active

The operating system versions that you see may vary from the example
shown.

The order of the A and B versions may be reversed depending on the
upgrade history of the system.

When you are downgrading, use the earlier of the two operating system
versions in this command:

vcx-os-switch 4.2.1

To confirm that you have selected the operating system version that you
want, repeat the

vcx-os-query

command. Verify that the word

“selected” appears in the Status column for the version that you want.

Example:

OS Version Partition Label Status

A 4.2.1 /dev/hda2 /A selected

B 5.1.3 /dev/hda3 /B active

Reboot the Server

Reboot the system using this command:

reboot

When the system reboots, it starts VCX 7.0 services.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands