3Com VCX V7000 Maintenance Manual Download

Page: 180 / 344

180

PPENDIX

A: U

PGRADING

VCX S

ERVER

OFTWARE

ROM

V7.0

V7.1

The

Do you want to continue with the above settings? [n/y]:

prompt appears.

Enter

to continue. The script executes.

Enter the following command to exit the

cworks

account and return to

the

root

account:

exit

Stop IP Messaging, first on the primary IP Messaging server and then on
the secondary IP Messaging server by entering these commands:

cd /opt/3com/VCX/scripts/rc3.d

./S60ums stop

Obtain a copy of the

vcx-softswitch-7.1.

c.tar

software upgrade file

and place it in the

/opt/installtemp

directory on the primary IP

Telephony server and on the secondary IP Telephony server. The variable

indicates the version of VCX software (for example,

vcx-all-7.1.3c.tar)

that will replace the current version. The letter

always appended to the version number.

Obtain a copy of the

vcx-ipmsg-7.1.

c.tar

software upgrade file and

place it in the

/opt/installtemp

directory on the primary IP Messaging

server and on the secondary IP Messaging server.

Next, execute the following steps in the order listed:

■

Upgrade the primary IP Telephony server. See

Upgrading the Primary IP

Telephony Server

■

Upgrade the primary IP Messaging server. See

Upgrading the Primary

IP Messaging Server

■

Upgrade the secondary IP Telephony server. See

Upgrading the

Secondary IP Telephony Server

■

Upgrade the primary IP Messaging server. See

Upgrading the

Secondary IP Messaging Server

■

Set up database replication on the primary IP Telephony server. See

Set

Up Database Replication

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands