3Com VCX V7000 Maintenance Manual Download

Page: 84 / 344

HAPTER

5: M

ANAGING

UTHENTICATION

AND

IRECTORY

ERVICE

ATABASES

Enter the site ID of the

Master Definition site.

The

vcxdata<site ID>backup.<version number>.tgz

back up file located at

/opt/3com/VCX/auth/db/import/

is restored to the VCX Authentication

and Directory server database.

Enter the following command on the primary VCX Authentication and
Directory server to start replication:

./setupReplication

The

Enter the VCX Site Identification i.e. Site Id

prompt

appears.

Enter the site ID of the

Master Definition site.

The

Enter the Number of MASTER SITEs other than the MASTER

DEFINITION SITE

prompt appears.

To determine the number of Master Sites associated with this office,
use the

listVcxdata

command. See

Verifying the Number of VCX Data

Schemas in a Region

for more information.

Enter the number of Master sites.

The

Enter the MASTER DEFINITION SITE IP Address [IP

address]

prompt appears.

Enter the IP Address of the Master Definition site.

The

Enter the MASTER SITE 1 IP Address [0.0.0.0]

prompt

appears. If the configuration includes more than one Master Site, this
question repeats until the number of master sites specified in a
previous question is reached.

Enter the IP Address of each Master Sites.

Once the replication is complete, use the

./checkReplication

command and verify the command returns

NORMAL

status.

Restart the Tomcat and the VCX Authentication and Directory services on
both the primary and secondary servers.

Enter the following commands to change the directory and start
Tomcat:

cd /opt/3com/VCX/scripts/rc3.d

./S70tomcat start

To start the VCX Authentication and Directory server, enter the
following commands:

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands