YOKOGAWA 701210 Скачать руководство пользователя страница 25

Страница: 25 / 747

Part 1:xiv

IM 701210-05E

Version

Suffix

New Functions

Reference Page/

Code

Section/Chapter

6.02 or later

Standard

• Connection of USB storage device to the USB PERIPHERAL

Section 13.3

interface (DL750)*

6.20 or later

Standard

• Added waveform icons to the title of the CH/DSP/LOGIC/EVENT

Section 5.1

setup menus.

• Added All ON of Variable (Var.) to the all channel setup menu.

Section 5.13 (section 5.9)

• Added ACQ Count to the action-on-trigger/action-on-stop setup menu.

Sections 6.18 and 7.8

• Added bandwidth limit to the channel information during

Section 8.13

temperature/strain measurement.

[Recording in recorder mode (DL750P only)]
• Added an Extra Area ON/OFF function when the format is set to

Section 9.4

Dual, Triad, or Quad in the print settings of Chart Recorder mode.

• Added the Fine setting to Gauge in the print settings of Chart

Section 9.4

Recorder mode.

• Added A4 print to the print length during reprint in Chart Recorder mode.

Section 9.8

• Selection of the print font size (Print Font) in the print settings of

Section 9.7

X-Y Recorder mode.

• Support for phase shift even when external clock is selected.

Section 10.4

[Printing on the built-in printer (DL750P only)]
• Added A4 print to the output format.

Section 12.2

• Added an Extra Area ON/OFF function when the format is set to Dual,

Section 12.2

Triad, or Quad in the print settings of fine print, zoom print, and A4 print.

• Added the Fine setting to Gauge in the print settings of fine print,

Section 12.2

zoom print, and A4 print.

• Creation of PDF files of the print image when all waveform display

Section 13.13 (section 11.1)

(Display Mode: All) is selected in the history memory function
(DL750P only).

• Added a function for switching the screen display font size (large

Chapter 17

or small).

/G2

• Added DUTYH and DUTYL to the user-defined computation.

Section 10.5

* Applicable to DL750s on which “USB Storage: Yes” is displayed on the overview screen that appears when you press the

MISC key followed by the Overview soft key.

DL750/DL750P Versions and Supported Modules

Version

Supported Modules

Specifications

Reference Section

Reference Page

Concerning Horizontal/

Vertical Axis Settings

1.07 or later

701250 High-Speed 10 MS/s, 12-Bit Isolation Module

Page 19-18

Sections 5.1 to 5.15

701251 High-Speed High-Resolution 1 MS/s, 16-Bit Isolation

Page 19-20

Sections 5.1 to 5.15

Module
701265 Temperature, High Precision Voltage Isolation Module

2.02 or later

701255 High-Speed 10 MS/s, 12-Bit Non-Isolation Module

Page 19-22

Sections 5.1 to 5.15

701260 High-Voltage 100 kS/s, 16-Bit Isolation Module

Page 19-24

Sections 5.1 to 5.15

(with RMS)
701270 Strain Module (NDIS)

701271 Strain Module (DSUB, Shunt-Cal)

3.01 or later

701275 Acceleration/Voltage Module (with AAF)

701280 Frequency Module

5.01 or later

701261 Universal (Voltage/Temp.) Module

701262 Universal (Voltage/Temp.) Module (with AAF)

* Reference section for acceleration measurement.

Functions Described in This Manual and the DL750/DL750P Version

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 25 / 747

Результаты поиска

Содержание 701210

Отзывы: