YOKOGAWA 701210 Скачать руководство пользователя страница 157

Страница: 157 / 747

4-19

IM 701210-05E

Common Operations

4.5 Performing Auto Setup

Explanation

The auto setup function automatically sets the settings such as V/div, T/div, and trigger

level that are appropriate for the input signal.

Center Position after Auto Setup

0 V:

Sets the center to 0 V. This is useful when you wish to view the relative

relationship between the ground level and the waveform.

Offset:

Sets the center to the offset value. This is useful when you wish to view the

shape of the waveform by maximizing the amplitude.

Target Channel

Auto setup is performed on all channels or on the specified channel.

Applicable Modules

701250 (HS10M12), 701251 (HS1M16), 701255 (NONISO_10M12), 701260 (HV (with

RMS)), 701261 (UNIVERSAL), 701262 (UNIVERSAL (AAF)), and 701275 (ACCL/VOLT)

Canceling Auto Setup

Pressing the Undo soft key sets the DL750/DL750P back to the conditions that existed

immediately before auto setup. However, when you turn OFF the power switch, the

settings that existed immediately before auto setup are cleared. Therefore, the “Undo”

operation is not possible in this case. The settings that existed immediately before auto

setup are cleared if you execute initialization after auto setup.

Applicable Waveforms for Auto Setup

Frequency:

Approx. 50 Hz to 1 MHz

Absolute value of the input voltage:

Maximum value is between approximately 20 mV

(1:1) and ((maximum range)

10)

Type:

Repetitive waveform (that is not complex)

When the input coupling is set to DC

Note

The auto setup function may not work properly if the waveform includes DC components or
high-frequency components.

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 157 / 747

Результаты поиска

Содержание 701210

Отзывы: