YOKOGAWA 701210 Скачать руководство пользователя страница 222

Страница: 222 / 747

6-4

IM 701210-05E

6.2 Setting the Trigger Position

Time Reference Mark

↓

mark is displayed at the time reference position of the acquisition data separately

from the trigger position.

• When Set to a Mode Other Than Roll Mode

Normally, the time reference point and the trigger position are displayed at the same

position, because they match.

If the waveform acquisition is stopped in the middle of the operation, the preset trigger

position and the actual trigger position (trigger point) are offset, because not all the

data of the pre-trigger section and post-trigger section have not been acquired. In this

case, the time reference mark is offset from the trigger position mark, because it

indicates the actual trigger point.

When the time reference mark is displayed
overlapped with the trigger position mark
( )

When the time reference mark is displayed
offset from the trigger position mark

Preset trigger position

Trigger point

Pre-trigger

Post-trigger

Time from the trigger position

Time from the trigger point

• For Roll Mode Display

When the trigger mode is set to Auto or Auto Level, the reference point is the point

when the waveform acquisition was stopped.

When the trigger mode is set to Log, the reference point is the point when the

waveform acquisition was started.

When trigger mode is set to Auto/Auto Level

When trigger mode is set to Log

Time reference point

Time from the reference point

Notes for Setting the Trigger Position

• If you change the trigger position while waveform acquisition is stopped, the new setting

will not become effective until acquisition is started and the waveform is updated.

• Note that cursor time measurements are with respect to the trigger position.

Changing the trigger position therefore changes the measurement values (except

when in roll mode display).

• If you change the T/div setting, the time axis setting is rescaled with respect to the

trigger position.

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 222 / 747

Результаты поиска

Содержание 701210

Отзывы: