manualshive.com logo in svg

YOKOGAWA 701210, Руководство пользователя, Страница: 330 / 747

Поделиться
Скачать
YOKOGAWA 701210 Скачать руководство пользователя страница 330

9-11

IM 701210-05E

Recording in Recorder Mode (Realtime Recording) (Only on the DL750P)

9

Details

Print Interval of Scale Values

Select the interval for the scale values printed at the top and bottom edges of the

recording area from OFF, 200 mm, 400 mm, or 800 mm. If OFF is selected, the scale

values are not printed.

Print Interval of Channel Labels

Select the interval for printing waveform channel labels from OFF, 200 mm, 400 mm,

or 800 mm.  The channel label is printed near each waveform. If OFF is selected, the

channel labels are not printed.

Time Print

Select the interval for printing the time from OFF, 200 mm, 400 mm, or 800 mm. The time is

printed at the top section of the recording area. If OFF is selected, the times are not printed.

Gauge Print

Select whether to not print (OFF), print (ON), or print in detail (Fine) on the right (or

left) side of the recording area. If ON is selected a gauge that equally divides the

waveform display area into two is displayed. If Fine is selected, a gauge that equally

divides the waveform display area into 10 is displayed. In realtime recording, the

gauge is printed on the right side of the recording area when the recording is

completed. When reprinting waveforms saved to the internal memory (see section

9.8), the gauge is printed on the left side of the recording area when the recording is

started. The gauge, scale values, an arrow indicating the ground position, and V/div

(Value/div)* are printed.

*

Depending on the setting of T-Y Recording, V/div (Value/div) may not be printed.

Annotation

Channel information, channel messages, or measured values are printed.  Use Annotation

to select the print interval from OFF, 200 mm, 400 mm, and 800 mm.  Use Type to select

the type of annotation to be printed from CH Information, CH Message, and CH Data.

• CH Information

Prints settings such as V/div, filter, and module.

• CH Message

Prints the character string (up to 80 characters) that is assigned to each channel.

• CH Data

Records the measured values at a given interval using numeric values.

The position where annotations are printed varies depending on the display

(recording) format and extra area settings as follows:

• When Format is Single, Dual, Triad, or Quad, and Extra Area is ON

The annotations are printed in the extra area.  Annotations are not printed in the

waveform recording area.

• When Format is Single, Dual, Triad, or Quad, and Extra Area is OFF

The annotations are printed at the bottom section of the waveform recording area.

• When Format is Octal or Hexadecimal

The annotations are printed between the divided waveform recording areas

(between the graticules).

Note

If all of the conditions below are met, only up to 67 characters of CH Message are printed.
Format: Single/Dual/Triad/Quad, Extra Area: OFF, Scale: Other than OFF

Comment

A comment string of up to 20 characters can be printed at the bottom right section.

For a print example on the built-in printer of T-Y recording, see the next section.

9.4  Setting the Recording Format of T-Y Waveform Recording

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов