6-24
IM 701210-05E
6.12 Setting the Edge on A Trigger (ENHANCED)
Setting the Bit Patterns/Status of LOGIC A and LOGIC B
(Only When Using Logic Input Channels)
9.
Press the
Logic Pattern
soft key. The Logic Pattern setup dialog box appears.
10.
Use the
jog shuttle
and
SELECT
to select the pattern of each bit (Bit A1 to Bit
A8 and Bit B1 to Bit B8) of condition A from H, L, and X.
11.
Likewise, use the
jog shuttle
and
SELECT
to select the edge trigger OR status
from , , and –.
Setting the Trigger Level
12.
Press the
Select CH
soft key. The channel selection menu appears.
13.
Use the
jog shuttle
and
SELECT
to set the channel to assign the trigger level.
14.
Press the
Level
soft key.
15.
Use the
jog shuttle
and
SELECT
to set the trigger level.
16.
Likewise, set the trigger level for all channels for which patterns were assigned
in steps 5 to 6.
Note
The trigger level setting applies to both simple and enhanced triggers.
Setting the Hysteresis
17.
Press the
Hysteresis
soft key to select
,
, or
.
Setting the Hold Off
18.
Set the hold off time according to the procedures given in section 6.4.
Note
The pattern settings of condition A apply to all trigger types.