YOKOGAWA 701210 Скачать руководство пользователя страница 278

Страница: 278 / 747

7-12

IM 701210-05E

Selecting the Display Format of Sub Waveforms

15.

Press the

Next 1/2

soft key.

16.

Press the

Format

soft key. The display format selection menu appears.

17.

Use the

job shuttle

and

SELECT

to select the display format of the sub

waveforms.

Selecting the Channels to Be Displayed in the Sub Waveform Window

18.

Press the

Allocation

soft key. A menu used to select the channels to be

displayed appears.

19.

Use the

job shuttle

and

SELECT

to select the channels whose waveforms are

to be displayed.

Turning ON/OFF Mail Transmission

20.

Press the

Send Mail

soft key. The mail transmission setup menu appears.

21.

Press the ON or OFF soft key.

22.

Use the

job shuttle

to set the number of times to send the mail.

Executing the Waveform Acquisition

23.

Press

START/STOP

to start the waveform acquisition.

When a trigger is activated on the specified trigger conditions, the waveform is

displayed in the sub waveform window.

Specifying and Displaying the Captured Waveform

24.

Press the

Capture Num

soft key.

25.

Turn the

jog shuttle

to specify the number of the waveform you wish to display.

Displaying a Waveform from the List of Captured Waveforms

26.

In the 2/2 menu, press the Show Map soft key. A list of acquired waveforms is
displayed.

27.

Turn the

job shuttle

to select the waveform to be displayed and press

SELECT

7.6 Using the Dual Capture Function

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 278 / 747

Результаты поиска

Содержание 701210

Отзывы: