YOKOGAWA 701210 Скачать руководство пользователя страница 36

Страница: 36 / 747

1-9

IM 701210-05E

Names and Functions of Parts

1.2 Panel Keys and Knobs

FILE

SHIFT

HELP

MISC

NUM KEY

SNAPSHOT

CLEAR TRACE

• SNAP SHOT Key (Section 8.7)

Leaves the current displayed waveform on the screen in black and white.

Waveforms acquired using the snap shot function can be saved and loaded.

• CLEAR TRACE Key (Section 8.7)

Clears the waveform acquired using the snap shot function and accumulated

waveforms.

• NUM KEY Key (Section 4.2)

Press this key to use the CH1 to CH16 keys as number input keys.

• MISC Key (Sections 3.5, 13.6, 16.2 to 16.10, 17.1 to 17.5)

Displays menus for setting the communication interface, setting the environment,

checking the system status, setting the SCSI ID number, accessing the self-

diagnostic function, turning ON/OFF the LCD backlight, etc.

• HELP Key (Section 4.7)

Turns ON/OFF the help window that provides description about the procedure.

• SHIFT Key

Pressing the key once causes the indicator above the key to illuminate and activate

the function marked below the key in purple. Pressing the key again clears the

shifted condition.

• FILE Key (Sections 13.5, 13.7 to 13.12, 13.14 to 13.17, and 16.3)

Displays a menu used to save various data to, recall various data, or execute file

operations on a storage medium such as a floppy disk, zip disk, PC card, external

SCSI device (option).

Note

Pressing the SHIFT key followed by the CLEAR TRACE key clears the remote mode using
the communication interface. For details, see the

Communication Interface User’s Manual

(IM 701210-18E).

PROTECT

VOICE

MEMO

IMAGE

SAVE

PRINT

MENU

DL750

PROTECT

VOICE MEMO

IMAGE

SAVE

PRINT

FEED

MENU

DL750P

• PROTECT Key (Section 17.6)

Pressing this key causes the LED above the key to illuminate, and the front panel

keys to be disabled. Pressing the key again clears the condition.

• VOICE MEMO Key (Section 7.9)

Displays a menu related to the voice memo function.

On the DL750P, (SHIFT+)FEED key is used to display the VOICE MEMO menu.

• FEED Key (Section 9.1)

Available only on the DL750P. Pressing this key feeds the paper on the built-in

printer.

• (SHIFT+) PRINT Key (Sections 12.2 to 12.4, and 16.4)

Executes the printing of the screen image data. Pressing the SHIFT key followed

by the PRINT key displays a menu used when printing the screen image to the

internal printer, USB printer, or network printer.

• (SHIFT+) IMAGE SAVE Key (Sections 13.11, 13.12, and 16.3)

Stores the screen image data to the storage medium. Pressing the SHIFT key

followed by the IMAGE SAVE key displays a menu related to the saving of the

screen image data.

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 36 / 747

Результаты поиска

Содержание 701210

Отзывы: