YOKOGAWA 701210 Скачать руководство пользователя страница 220 | Manualshive

Страница: 220 / 747

YOKOGAWA 701210 Скачать руководство пользователя страница 220

6-2

IM 701210-05E

Normal Mode

The display is updated only when the trigger conditions are met. The display is not

updated if the trigger does not occur. Therefore, to check the waveform or ground level

when no trigger is detected, use auto mode.

Single Mode

The display is updated once when the trigger conditions are met and the waveform

acquisition stops. In the time axis setting range in which the display mode is set to roll

mode, the display is set to roll mode. When a trigger occurs, the specified record length

of data is acquired and the displayed waveform stops.

Single (N) Mode

When the trigger condition is met, the waveform is acquired the specified number of

times and stops. This mode is used when acquiring a waveform using the sequential

store function.

Log Mode

In this mode, the trigger settings are disabled. The specified record length of data is

acquired once when acquisition is started, and the displayed waveforms are updated. If

the time axis setting is in the range in which the display mode is set to roll mode, the

display is set to roll mode.

Note

•

The trigger mode setting applies to both simple and enhanced triggers.

•

In the recorder mode of the DL750P (see chapter 9), select the trigger mode from Auto,
Repeat, Single, and Log. For details on the Repeat mode, see section 9.3.

6.1 Setting the Trigger Mode

«
...
218
219
220
221
222
...
»

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов