manualshive.com logo in svg

YOKOGAWA 701210, Руководство пользователя, Страница: 205 / 747

Поделиться
Скачать
YOKOGAWA 701210 Скачать руководство пользователя страница 205

5-45

IM 701210-05E

Horizontal and Vertical Axes

5

5.19 Setting the Frequency (Number of Rotations, Period, Duty Cycle, Power Supply Frequency,

Pulse Width, Pulse Integration, and Velocity) Measurement

When Measuring the Duty Cycle

Setting the Measurement Item

4.

Press the 

FV Setup 

soft key.  A setup dialog box opens.

5.

Use the 

jog shuttle 

and 

SELECT 

to set Function to Duty.

Setting the Measurement Pulse

6.

Use the 

jog shuttle 

and 

SELECT 

to set Measure Pulse to Positive or Negative.

Setting Value/Div

7.

Turn the V/DIV knob to set the Value/Div value.  You can also set Value/Div by

pressing the 

Value/Div 

soft key and turning the 

jog shuttle

.

Note

The unit for Value/Div and offset are synchronized to the unit of the measurement mode
selected in steps 4 and 5.  For the procedure of setting the offset value, see section 5.10.

Carry out steps 8 and 9 below as necessary.

Setting the Smoothing Filter

8.

To enable the smoothing filter, use the 

jog shuttle 

and 

SELECT 

to set Filter to

Smoothing.

9.

Use the 

jog shuttle 

and 

SELECT 

to set the moving average order of smoothing

in the range of 0.0 to 1000.0 ms.

Smoothing filter
Moving average order of smoothing

Set Function to Duty

Measurement pulse

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов