manualshive.com logo in svg

YOKOGAWA 701210, Руководство пользователя, Страница: 268 / 747

Поделиться
Скачать
YOKOGAWA 701210 Скачать руководство пользователя страница 268

7-2

IM 701210-05E

7.1 Starting/Stopping Waveform Acquisition

Conditions When Waveform Acquisition Cannot Be Started or Stopped

• Remote mode using the communication interface

• When printing or during auto setup

Setting the Waveform Acquisition Mode at Power ON

You can select whether to start waveform acquisition at power on.  For example, select

ON if you wish to start waveform acquisition when power supply recovers after a power

failure.  The initial setting is OFF.

ON:

Starts waveform acquisition at power on.

OFF:

Does not start waveform acquisition at power on.

START/STOP Key Response Time Setting

You can enter a setting to specify whether the instrument responds immediately when

the START/STOP key is pressed, or whether the instrument only responds if the key is

pressed for one second or longer.

Quick:

Immediate response

>1sec:

Responds when the key is pressed for one second or longer

Note

•

If you start waveform acquisition after changing the waveform acquisition conditions
indicated below, the data that had been stored in the acquisition memory up to that point is
cleared.
•

Setup conditions on the ACQ menu

•

Setup conditions of the module
•

Input coupling of the 701265 (TEMP/HPV) (when a change is made between TC
and some other setting) and the thermocouple type setting (when measuring
temperature)

•

Input coupling of the 701275 (ACCL/VOLT) (when a change is made between
ACCL and  some other setting) and the sensitivity setting (when measuring
acceleration)

•

FV setting of the 701280 (FREQ) and offset setting

•

Trigger setup conditions

•

Setup conditions of the DUAL CAPTURE menu

•

T/div

•

A snapshot function that keeps the current displayed waveform on the screen is also
available.  You can update the display without stopping the waveform acquisition (see the
next section).

•

For a description of the behavior when the Start Mode (Power On) is ON or OFF, see
appendix 9.

•

When waveforms are being acquired using roll mode display (see page 2-4), voice memo
can be recorded.  For details, see section 7.9, “Using the Voice Memo Function.”

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов