YOKOGAWA 701210 Скачать руководство пользователя страница 114

Страница: 114 / 747

3-11

IM 701210-05E

Making Preparations for Measurements

Turning ON/OFF the Power Switch

Items to Be Checked before Turning ON the Power

• The instrument is properly installed.:

See section 3.2, “Installing the Instrument.”

• The power cord is properly connected.:

See section 3.4, “Connecting the Power

Supply.”

Turning ON/OFF the Power Switch

Pressing the power switch located on the left side panel to the “ON(|)” side, turns the

power ON. Pressing it to the “OFF(O)” side turns the power OFF.

Turning ON/OFF the DC Power (/DC)

Items to Be Checked before Turning ON the Power

• The instrument is properly installed.:

See section 3.2, "Installing the Instrument."

• The power cord is properly connected.: See section 3.4, "Connecting the Power

Supply."

Turning ON/OFF the Power Switch

Pressing the power switch located on the left side panel to the "ON(|)" side, turns the

power ON. Pressing it to the "OFF(O)" side turns the power OFF.

Note

If AC power is supplied and the main power switch to the AC power is ON, AC power is used.

Status Display of the DC Power Supply

The power supply status is indicated on the LED on the left side panel.

AC LED

LED Status

Description

Illuminated in green Operating on AC power

DC LED

LED Status

Description

Illuminated in green Operating on DC power (AC power is not connected)

Operating on AC power, and the DC supply voltage is within the operating
range (10 to 18 VDC)

Illuminated in red

Operating on DC power, and the DC supply voltage is outside the
operating range

Illuminated in orange DC power is turning ON/OFF repeatedly (internal protection circuit is

tripping)
Power is not supplied in this condition. This status is automatically cleared
after 10 to 20 seconds.

Illuminated in red

Internal circuit operation failure. Repair is necessary.

Off

Operating on AC power, and the DC supply voltage is within the operating
range (10 to 18 VDC) or the DC power is not supplied

3.4 Connecting the Power Supply

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 114 / 747

Результаты поиска

Содержание 701210

Отзывы: