YOKOGAWA 701210 Скачать руководство пользователя страница 601 | Manualshive

Страница: 601 / 747

YOKOGAWA 701210 Скачать руководство пользователя страница 601

16-49

IM 701210-06E

Ethernet Interface (Optional)

16

Explanation

Set the time difference from GMT (Greenwich Mean Time). Make sure to set this value if

you are using the Web server function.

Setting the Time Difference from GMT (Greenwich Mean Time)

Set the time difference in the range of –12 hour 00 minute to 13 hour 00 minute.

For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Time

Hour to 9 and Minute to 00.

Checking the Standard Time

Check the standard time for the region where the DL750/DL750P is to be used using one

of the following methods.

• Check the date and time settings on your PC.

• Check the site at the following

URL:http://www.worldtimeserver.com/

Note

The DL750/DL750P does not support daylight savings time. To set the daylight savings time,
adjust the time difference from GMT.

Setting the SNTP

When turning ON the power to the instrument, the instrument’s time is synchronized with

that of the SNTP server connected to the network.

Note

•

If a time difference from world standard time (Greenwich Mean Time) is specified, the time
obtained from the SNTP server is adjusted accordingly, and that time is used.

•

When setting the date and time on the instrument, you can synchronize the time with the
SNTP server. For details, see section 3.5, “Setting the Date and Time.”

•

When not synchronizing the time with the SNTP server, do not enter the SNTP server’s IP
address.

16.8 Setting the Time Difference from GMT (Greenwich Mean Time)/SNTP

«
...
599
600
601
602
603
...
»

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов