YOKOGAWA 701210 Скачать руководство пользователя страница 75

Страница: 75 / 747

2-37

IM 701210-05E

Explanation of Functions

2.4 Setting Waveform Acquisition Conditions and Display Conditions

Display Format and Waveform Mapping <Sections 8.1 to 8.4, 8.8 to 8.13>

Display Format

Waveforms can be displayed in divided windows to facilitate the viewing of multi-channel

waveforms and computed waveforms. The screen can be divided into the following

types.

Single (no division), Dual (two divisions), Triad (three divisions), Quad (four divisions),

Octal (eight divisions), Hexadecimal (16 divisions).

Waveform Mapping

You can select the mapping of the input channels to the divided windows from the

following.

Auto: The input channels that are turned ON are assigned in order by the channel

numbers.

Fixed: The input channels are assigned in order by channel number regardless of

whether the channels are ON/OFF.

User: The channels can be assigned arbitrarily to the divided windows regardless of

whether the channels are ON/OFF.

Display Interpolation <Section 8.2>

In areas where less than 1000 points of data exist in the 10 divisions along the time axis

(referred to as interpolation areas), a continuous waveform cannot be displayed because

there is not enough sampled points. In this case, waveform is displayed by interpolating

between data points. You can select the interpolation method from the following:

Linear Interpolation

Linearly interpolates between two dots.

Sine Interpolation

Generates interpolation data using the function sin(x)/x then interpolates between two

dots using the resulting sine curve. Sine interpolation is suitable for observing sine

waves or similar waves.

Interpolation OFF

Displays discrete dots without performing interpolation.

Linear Interpolation

Sine Interpolation

Interpolation OFF

All-Point Display and Decimation Display <Section 8.2>

If the interpolation is OFF, waveforms are displayed using dots. In this setting, up to

2002 points or 100100 points (select either 2 k or 100 k points) of the acquired data are

displayed without using P-P compression (see page 2-12). For example, if the number

of displayed points is set to 100 k and the display record length is 10 kW (the number of

acquired data points is 10010 points), all the points of the waveform are drawn by

aligning 10 points vertically at the same time axis positions. If the number of acquired

data points exceeds 2002 or 100100, the data is decimated down to 2002 or 100100

points (select either 2 k or 100 k points) for displaying the waveform.

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 75 / 747

Результаты поиска

Содержание 701210

Отзывы: