manualshive.com logo in svg

YOKOGAWA 701210, Руководство пользователя, Страница: 292 / 747

Поделиться
Скачать
YOKOGAWA 701210 Скачать руководство пользователя страница 292

7-26

IM 701210-05E

Playing of the Voice Memo

13.

Press the 

Next 2/2 

soft key.

14.

Press the 

Voice Number 

soft key.

15.

Use the 

jog shuttle 

to select the number of the voice data you wish to play.

16.

Press the 

Play Start 

soft key.  The voice memo of the specified number is

played.

Note

•

Current indicates the newest voice memo (voice recorded on the rising edge of the event
bit of the event waveform that is displayed at the right-most position on the screen).  The
oldest memo is indicated as #1.  The voice memo is newer as the number gets larger.

•

While the voice memo is being played, the soft key indication changes to Play Stop.  To
stop the voice memo while it is playing, press the Play Stop soft key.

•

An icon 

 appears at the upper left corner of the screen while voice memo is being

played.

•

The voice memo can be played through a speaker by connecting an external speaker.
For the procedure of connecting a speaker, see section 3.14.

•

The voice memo can also be played using voice search of the SEARCH menu.  For
details, see section 11.4.

Executing the Waveform Data Save Operation

17.

Save the waveform data according to steps 1 to 25 in “Saving the Waveform

Data” in section 13.7.  The recorded voice memo is also saved.

Executing the Waveform Data Load Operation

18.

Load the waveform data according to steps 1 to 10 in “Loading the Waveform

Data” in section 13.7.  When waveform data with a voice memo is loaded, the

voice memo can be played.  The procedure of playing the voice memo is the

same as steps 13 to 16 in this section.

Note

To determine whether a voice memo is attached to the waveform data, open the properties of
the waveform data (see section 13.7) using FILE key > Load > Property.  If the VOICE MEMO
item in the properties is ON, a voice memo is attached to the waveform data, otherwise a
voice memo is not attached.

Used only when erasing 
a recorded voice memo.

Voice number

7.9 Using the Voice Memo Function

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов