YOKOGAWA 701210 Скачать руководство пользователя страница 457

Страница: 457 / 747

13-3

IM 701210-06E

Saving and Loading Data

Procedure When the Zip Disk Cannot Be Ejected

If the Zip disk cannot be removed by performing the steps above, carry out the following

steps to remove it.

Insert a pin of approx. 1 mm in diameter into the eject button hole and press slowly. This

will cause the Zip disk to be ejected.

Eject button of the Zip disk

Insert a pin.

Zip disk eject hole

CAUTION

• Removing the Zip disk while the access indicator is ON may destroy the data on

the Zip disk.

• Do not use the Zip drive if the DL750 is installed using the stand. (For the

installation position, see section 3.2.)

• When turning ON/OFF the DL750, have the Zip disk removed from the drive.

• Do not insert the Zip disk into the drive, or remove the Zip disk from the drive

while the DL750 is starting up after turning ON the power (see section 3.4,

“Power Up Operation”). Doing so can damage the disk.

• The access indicator illuminates immediately after the Zip disk is inserted. Do

not operate the DL750 while the access indicator is illuminated. Such act can

lead to erroneous operation.

General Handling Precautions of Zip Disks

For the general handling precautions of the Zip disk, read the instruction manual that

came with the Zip drive.

13.1 Floppy Disks/Zip Disks/PC Cards

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 457 / 747

Результаты поиска

Содержание 701210

Отзывы: