Yamaha WR450F, Руководство по эксплуатации для владельца

Страница: 536 / 794

4 - 108
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
3. Install:
• Plain washer
1
• Circlip
2
NOTE:
• Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the plain washer
and gear
b
.
• Install the circlip with its ends
c
settled
evenly on the spline crests.
c c
New
4. Install:
• Collar
1
NOTE:
• Apply the lithium soap base grease on the oil
seal lip.
• When installing the spacer into the crank-
case, pay careful attention to the crankcase
oil seal lip.
5. Install:
• Shift fork 1 (L)
1
• Shift fork 2 (C)
2
• Shift fork 3 (R)
3
• Shift cam
4
To main axle and drive axle.
NOTE:
• Apply the molybdenum disulfide oil on the
shift fork grooves.
• Mesh the shift fork #1 (L) with the 4th wheel
gear
5
and #3 (R) with the 5th wheel gear
7
on the drive axle.
• Mesh the shift fork #2 (C) with the 3rd pinion
gear
6
on the main axle.