Yamaha WR450F, Руководство по эксплуатации для владельца

Страница: 654 / 794

5 - 58
CHAS
SWINGARM
6. Install:
• Swingarm
1
• Pivot shaft
2
NOTE:
• Apply the molybdenum disulfide grease on
the pivot shaft.
• Insert the pivot shaft from right side.
T
R
.
.
85 Nm (8.5 m · kg, 61 ft · lb)
7. Check:
• Swingarm side play
a
Free play exists
→
Replace thrust bear-
ing.
• Swingarm up and down movement
b
Unsmooth movement/binding/rough
spots
→
Grease or replace bearings,
bushes and collars.
8. Install:
• Bolt (connecting rod)
1
• Plain washer
2
• Nut (connecting rod)
3
NOTE:
• Apply the molybdenum disulfide grease on
the bolt.
• Do not tighten the nut yet.
9. Install:
• Bolt (rear shock absorber-relay arm)
1
• Nut (rear shock absorber-relay arm)
2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
T
R
.
.
53 Nm (5.3 m · kg, 38 ft · lb)
10. Tighten:
• Nut (connecting rod)
1
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)