7-14
E
–
+
ELEC
IGNITION SYSTEM
IGNITION SYSTEM PEAK VOLTAGE
WARNING
When checking the electrical components,
do not touch any of the connections of the
digital tester lead wires.
NOTE:
• If there is no spark, or the spark is weak,
continue with the ignition system test.
• If a good spark is obtained, the problem is
not with the ignition system, but possibly with
the spark plug(s) or another component.
1. Measure:
• ECM output peak voltage
Below specification
→
Measure the
pickup coil output peak voltage.
NOTE:
To crank the engine, connect the engine shut-
off cord (lanyard) to the engine shut-off switch,
and then press the start switch and engine
stop switch simultaneously.
ECM output peak voltage:
Black/red (B/R) – Ground for
cylinder #1
Black/white (B/W) – Ground for
cylinder #2
Black/yellow (B/Y) – Ground for
cylinder #3
r/min
Loaded
Cranking
2,000
3,500
V
0.8
174
156
Содержание WaveRunner GP1300R
Страница 526: ...8 31 E HULL HOOD SEAT AND HANDGRIP SERVICE POINTS Seat lock inspection 1 Check Seat lock Damage wear Replace ...
Страница 575: ......
Страница 576: ......
Страница 577: ...YAMAHA MOTOR CO LTD Printed in Japan Mar 2003 0 7 1 CR E F G S Printed on recycled paper ...