Xerox 4595, Руководство пользователя

Страница: 162 / 502

Xerox 4595 Copier/Printer User Guide 3-42
3. Scan
„
Non-standard Size
Enter the desired scan size when scanning non-standard size
documents or when making scans at a size different from that of
the currently loaded document. The size can be specified in 1 mm
increments from within the range of 0.5 to 17.0 inches (15 to 432
mm) for the width (X) on the document glass and within the range
from 0.5 to 11.7 inches (15 to 297 mm) for the height (Y) on the
document glass.
When entering a non-standard size, we recommend using the
scale on the outside of the document glass to help you specify the
document size.
Mixed Size Originals
You can simultaneously scan different sized documents onto
paper that matches the respective sizes of the documents.You can
also specify the size of the paper to scan so that scan is made on
the same size of paper. When using the document feeder to scan,
you can match the scan size to use for each document.
KEY POINT:
Always load the A5-size documents in portrait
orientation (LEF).
When loading a B5 size document with A3 or 8.5 x 11 in./
A4 size documents in a vertical direction, place the B5
document also in a vertical direction.
The recommended combinations of document sizes are
8.5 x 11 inch/A4 portrait and 11 x 17 inch/A3 landscape or
B5 portrait and B4 landscape. When you use a
combination of document sizes other than these,
documents may not be fed or scanned properly.
NOTE: When setting the Reduce/Enlarge to Auto% and
specifying an Output Size, the scan is performed with automatic
reduce/enlarge to the specified size.
When a document size cannot be detected automatically, a
message prompting document size entry appears.
If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle
may not be copied properly