Toyota 1996 LAND CRUISER, Руководство пользователя

Страница: 1337 / 1381

SS1EG − 02
− SERVICE SPECIFICATIONS STEERING
SS − 37
160 Author: Date:
1996 LAND CRUISER (RM451U)
STEERING
SERVICE DATA
ON − VEHICLE INSPECTION
Steering wheel freeplay Maximum 40 mm (1.57 in.)
Fluid level rise Maximum Below 5 mm (020 in.)
Fluid pressure at idle speed with valve closed Minimum 9,316 kPa (95 kgf/cm
2
, 1,351 psi)
Steering effort at idle speed Maximum 8.3 N·m (85 kgf·cm, 73 in.·lbf)
TILT STEERING COLUMN
Pawl stopper alignment mark 1 or A
2 or B
3 or C
4 or D
5 or E
12.65 − 12.75 mm (0.4980 − 0.5020 in.)
12.55 − 12.65 mm (0.4941 − 0.4980 in.)
12.45 − 12.55 mm (0.4902 − 0.4941 in.)
12.35 − 12.45 mm (0.4962 − 0.4902 in.)
12.25 − 12.35 mm (0.4823 − 0.4862 in.)
PS VANE PUMP
Oil clearance between pump shaft and bushing STD
Maximum
0.03 − 0.05 mm (0.0012 − 0.0020 in.)
0.07 mm (0.0028 in.)
Vane plate height Minimum 8.6 mm (0.339 in.)
Vane plate thickness Minimum 1.397 mm (0.05500 in.)
Vane plate length Minimum 14.991 mm (0.59016 in.)
Vane plate and pump rotor groove clearance Maximum 0.033 mm (0.00130 in.)
Vane plate length Pump rotor mark
None
1
2
Cam ring mark
2
3
4
14.995 − 14.997 mm (0.59035 − 0.59043 in.)
14.993 − 14.995 mm (0.59027 − 0.59035 in.)
14.991 − 14.993 mm (0.59020 − 0.59027 in.)
14.995 − 14.997 mm (0.59035 − 0.59043 in.)
14.993 − 14.995 mm (0.59027 − 0.59035 in.)
14.991 − 14.993 mm (0.59020 − 0.59027 in.)
Spring free length STD 35 − 37 mm (1.38 − 1.46 in.)
Vane pump rotaing torque Maximum 0.3 N·m (2.8 kgf·cm, 2.4 in.·lbf)
PS GEAR
Worm gear valve body ball clearance Maximum 0.15 mm (0.059 in.)
Cross shaft adjusting screw thrust clearance STD 0.03 − 0.05 mm (0.0012 − 0.0020 in.)
Worm gear preload 0.3 − 0.5 N·m (3 − 5.5 kgf·cm, 2.6 − 4.8 in.·lbf)
Total preload 0.74 − 1.08 N·m (7.5 − 11.0 kgf·cm, 6.5 − 9.6 in.·lbf)
STEERING LINKAGE
Tie rod length Approximately 1.207 mm (47.51 in.)
Relay rod length Approximately 1.085 mm (42.72 in.)
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010