Dionex ICS-5000
+
Installation Instructions
52
Doc. 065447-02 12/14
3.9.5
Selecting Configuration Properties
When you add a module to an instrument or timebase, default configuration
properties are selected. For each module, verify the default settings and select
other settings as required.
To open a configuration properties dialog box, right-click the module in the
instrument or timebase and click
Properties
. The tab pages available in the
dialog box, as well as the options on each tab page, depend on the type of
device. Some example tab pages are described in the following sections. For
details about a tab page, click
Help
.
EG Configuration Properties
On the
Cartridges
tab page (see
), select the following settings
for each Dionex EGC:
•
In the
Instrument
(or
Timebase
) box, select the instrument (or timebase)
to which this cartridge is assigned.
•
In the
Link to Pump
box, select the pump name. The EG must be linked
to a pump in order to receive flow rate information. This prevents damage
to the cartridge by ensuring that the EG does not operate when the pump
is off or the flow rate is too low.
Figure 3-21. EG Configuration Example: Cartridges Tab Page
