USB Registers
Table 16-146. RX_CALIB Register Field Descriptions (continued)
Bit
Field
Type
Reset
Description
1
SQ_CAL_DONE
R
0h
Sq calibration is done when this bit = 1.
see RESTART_SQ_CAL for more description.Read value is valid
only if VDDLDO is on.
0
RESTART_SQ_CAL
R/W
0h
the squelch calibration continuously goes through restart cycles
when this bit is 1 .
i.e.
restarts waits for done then restarts again etc.
1905
SPRUH73H – October 2011 – Revised April 2013
Universal Serial Bus (USB)
Copyright © 2011–2013, Texas Instruments Incorporated