Technogym BIOSTRENGTH LINE, Руководство по техническому обслуживанию

Страница: 469 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.295
7.7.37. D
ISASSEMBLING THE LEVERS
Figure 7.7.37-1
Follow the steps described in paragraph 7.7.35.
“Disassembling the front guard”.
1. Select the minimum weight.
2. Shut off the equipment and unplug the power
cord from the wall socket.
For each LEVER:
3. Raise the LEVER slightly and unscrew the
screw a using a 17-gauge wrench.
Figure 7.7.37-2
4. Unscrew the screw b using a 17-gauge
wrench.
5. Use a 17-gauge wrench to unscrew the 4
screws c .
6. Remove the 2 clamps d blocking the
LEVER.
7. Remove the LEVER.
8. With the LEVER resting on the bench, you
may also work on the 2 oblique bearings.
To reassemble the LEVERS, follow the above
steps in reverse order
When the operation is complete, adjust
the position of the levers as described in
paragraph 8.2. .